How to reset the trip distance on Ride1Up displays
Trip is cleared from the ride screen or a 'Trip reset' entry in the menu; ODO is permanent.
Step by step
- Switch the display on and stop.
- Press power/M briefly until 'TRIP' shows.
- Press and hold the power/M button and '-' together for 2 seconds; TRIP resets.
- Alternatively: With the display on and the bike stationary, press and hold '+' and '-' together for about 2 seconds to open the settings menu. Then find 'TRIP reset' / 'Clear' and confirm.
- Roadster compact display: hold power and '+' together.
Tip: Some KD firmware resets TRIP automatically after 30 minutes off.
Can't find it?
If you enter the settings menu instead, you held the wrong pair; exit and use power/M with one arrow.
Frequently asked
Can ODO be reset?
No.
TRIP too high.
Wheel size wrong; see the wheel-size guide.
Where is the range?
KD displays show a rough range estimate on the ride screen; it is voltage-based.
Manuals and video
Other Ride1Up displays (Turbo, Roadster, 700 series) guides
Ride1Up: switch mph to km/hRide1Up: wheel size settingRide1Up: pedal assist levelsRide1Up: display brightnessRide1Up: walk modeRide1Up: lightsRide1Up: speed limit and class 3 settingRide1Up: throttle on/off
Still stuck? Take a photo of the display and show it to a local e-bike workshop. Bring the bike's system name (e.g. Bosch Performance Line CX) and the exact code; that saves diagnostic time and money.