How to reset the trip distance on a Lectric XP or XPedition
TRIP resets from the ride screen; ODO is permanent.
Step by step
- Switch the display on and stop the bike.
- Press the power/M button briefly until the lower field shows 'TRIP'.
- Press and hold the power/M button and '-' together for about 2 seconds; TRIP resets to 0.
- If that does nothing, try holding '+' and power/M instead (XPedition firmware).
- TRIP also resets automatically after the bike has been off for a while on some firmware.
Tip: There is no reset for ODO on any Lectric display.
Can't find it?
If you land in the P-menu, you held '+' and '-'; exit (hold both again) and use power/M plus one arrow.
Frequently asked
TRIP is way too high.
Wheel size (P06) or magnet count (P07) wrong; see the wheel-size guide.
Does the display show range?
No; the battery bar is voltage-based.
Can I see average speed?
Press power/M to cycle TRIP, AVG, MAX, TIME on XP 3.0 and XPedition.
Manuals and video
Videos found on YouTube and checked automatically; they are other people's work, not ours.
- How to Reset the Tripometer of Your E-Bike? - Clearing a Trip Meter of an Engwe Electric Bike Electric Wheelers
Other Lectric XP 2.0 / 3.0 / XPedition display guides
Lectric: switch mph to km/hLectric: wheel size and magnet countLectric: pedal assist levelsLectric: display brightnessLectric: walk modeLectric: lightsLectric: class 2 / class 3 speed setting (P08)Lectric: throttle on/off and class rules
Still stuck? Take a photo of the display and show it to a local e-bike workshop. Bring the bike's system name (e.g. Bosch Performance Line CX) and the exact code; that saves diagnostic time and money.