How to turn the lights on and off on a Lectric XP or XPedition
Integrated headlight and tail light are switched from the display; the tail light also acts as a brake light on XP 3.0 and XPedition.
Step by step
- With the display on, press and hold '+' for 2 seconds. The light icon appears and both lights come on.
- Hold '+' again to turn them off.
- The brake light works whenever the display is on.
- Lights switch off with the display.
Tip: The headlight is dim by design; for night riding add a proper front light.
Can't find it?
If holding '+' only raises the level, hold longer. If the icon shows but no light, check the plug at the headlight.
Frequently asked
Tail light stays on constantly.
Brake sensor stuck; adjust the lever free play.
Can I add turn signals?
Not on XP 2.0/3.0; XP 4 has them.
Do the lights drain the battery?
No, a few percent per hour.
Manuals and video
Videos found on YouTube and checked automatically; they are other people's work, not ours.
- How to turn your lights on your lectric bike #lectricebikes Jmgt
- Lectric XPLite flashing light feature. #lectric #lectricebike #lectricxp #ebike #lectricxplite BraKyn Cycles
- Lectric bike how to turn brake and front light. # electricbike #lectric Protect My Home
Other Lectric XP 2.0 / 3.0 / XPedition display guides
Lectric: switch mph to km/hLectric: reset the tripLectric: wheel size and magnet countLectric: pedal assist levelsLectric: display brightnessLectric: walk modeLectric: class 2 / class 3 speed setting (P08)Lectric: throttle on/off and class rules
Still stuck? Take a photo of the display and show it to a local e-bike workshop. Bring the bike's system name (e.g. Bosch Performance Line CX) and the exact code; that saves diagnostic time and money.