Home › Display settings › Bosch Smart System (Purion 200, Intuvia 100, Kiox 300/500, LED Remote, System Controller) › Bosch Smart System: turn the lights on and off, automatic and always-on lights
Bosch Smart System: turn the lights on and off, automatic and always-on lights
Lights are switched with the light button on the LED Remote / Mini Remote; eBike Flow can set automatic or always-on lighting where the manufacturer allows. One minute.
Step by step
- Switch the bike on.
- Press the light button (bulb icon) on the LED Remote or Mini Remote. An LED or symbol confirms; the Kiox 300 switches to its dark scheme.
- Press again to switch off.
- Automatic or always-on: eBike Flow > Settings > your eBike > 'Lighting' (or 'Light'); choose Manual, Auto (light sensor, if the bike has one) or Always on, if the option is offered for your bike.
- If the option is missing, the manufacturer fixed the behaviour (often always-on for NL/DE); a dealer can change it in DiagnosticTool where permitted.
Tip: Daytime running lights cost almost no range; leave them on for visibility.
Can't find it?
If the light button gives an error in the app or on the display, look up the code on our error-code pages; on the Smart System a shorted lamp cable produces a specific lighting error rather than just no light.
Frequently asked
Can I set auto lights on the Smart System?
If the bike has a light sensor and the manufacturer allows it, yes, in eBike Flow under Lighting.
Why can't I switch the lights off?
Always-on is configured by the manufacturer for your market.
Do the lights run off the main battery?
Yes, powered by the drive unit.
Manuals and video
- Bosch eBike Help Center: official error-code index
- Bosch eBike downloads: quick start guides and battery guide
- Bosch eBike dealer search (DiagnosticTool readout)
Videos found on YouTube and checked automatically; they are other people's work, not ours.
- How to use the lights Bosch Smart System LED remote and intuvia 100 display #boschebike #ebike John M Hanna Cycles & E-bikes
Other Bosch Smart System (Purion 200, Intuvia 100, Kiox 300/500, LED Remote, System Controller) guides
Bosch Smart System: change the display language (Kiox 300/500, Intuvia 100, Purion 200)Bosch Smart System: switch from mph to km/h (or km/h to mph)Bosch Smart System: set the time (or let it sync from your phone)Bosch Smart System: reset the trip distance and set automatic resetBosch Smart System: wheel circumference (dealer-set, small correction in app)Bosch Smart System: customise the riding modes in eBike FlowBosch Smart System: activate and use eBike Lock in eBike FlowBosch Smart System: set the display brightness (Kiox 300/500, Intuvia 100, Purion 200)Bosch Smart System: pair with the eBike Flow app via BluetoothBosch Smart System: update the firmware over the air with eBike FlowBosch Smart System: enable and use walk assist (LED Remote, Mini Remote, Purion 200)
Still stuck? Take a photo of the display and show it to a local e-bike workshop. Bring the bike's system name (e.g. Bosch Performance Line CX) and the exact code; that saves diagnostic time and money.