Brose error codes

26 codes. Tap a code for meaning, causes and the fix.

All Brose codes

• 10 – Battery voltage too low Fix at home
• 11 – Battery Voltage Reading Too High Dealer needed
• 12 – Battery pack low or fully discharged Information
• 20 – Drive unit reports incorrect electrical readings Dealer needed
• 21 – Thermal sensor fault in the drive unit Dealer needed
• 24 – Internal voltage out of working range Fix at home
• 25 – Motor current measurement fault Dealer needed
• 26 – Motor completed an internal software reset Warning
• 40 – Motor drawing excessive current Warning
• 41 – Motor drawing excessive current Warning
• 42 – Internal motor rotation sensor fault Dealer needed
• 43 – Motor Short Circuit Fault Dealer needed
• 44 – Motor Has Overheated Warning
• 45 – Motor rotation signal corrected by software Warning
• 46 – Motor Movement Signal Not Detected Dealer needed
• 60 – Brose Drive CAN bus communication fault Dealer needed
• 70 – Pedal force outside valid range Dealer needed
• 71 – Pedal rotation not detected by drive Dealer needed
• 72 – Motor not detecting pedal force input Dealer needed
• 73 – Pedal force sensor connection lost Dealer needed
• 74 – Internal data error detected Dealer needed
• 80 – Brose motor parameter error on display Dealer needed
• 81 – Speed sensor signal not recognized Fix at home
• 82 – Drive program manipulation detected Dealer needed
• 83 – Program sequence fault in the Brose drive Dealer needed
• 84 – Incorrect motor parameter fault detected Dealer needed

Manuals and video

• Specialized Rider Care knowledge base (manuals)