Home › Aventon › Error 04

Aventon error 04: Throttle not in home position

Aventon e-bikes with Bafang hub motor (Pace, Level, Aventure, Sinch, Soltera) and Aventon colour or LCD displayFix at homeRide with caution

Aventon displays follow the Bafang UART error list; 04 means the throttle read above its idle voltage when the bike was switched on. No assist until the throttle reads rest.

Drive systemAventon e-bikes with Bafang hub motor (Pace, Level, Aventure, Sinch, Soltera) and Aventon colour or LCD display
SeverityFix at home
Keep riding?Ride with caution
Typical costThrottle about USD 25-40; controller about USD 100-180.

Likely causes

How to fix Aventon error 04

  1. Power cycle without touching the throttle
  2. Check the throttle returns freely; clean it
  3. Unplug the throttle: if the code clears, replace the throttle
  4. Dry and clean the connector
  5. If 04 stays with the throttle unplugged, contact Aventon support about the controller
Go to a dealer if: Go to an Aventon dealer if a new throttle does not fix it.
Warranty: Aventon gives a 2-year limited warranty on frame, motor, battery and electronics through its dealer network; open a ticket with Aventon support before replacing parts.
Typical cost: Throttle about USD 25-40; controller about USD 100-180.
Still stuck? Take a photo of the display and show it to a local e-bike workshop. Bring the bike's system name (e.g. Bosch Performance Line CX) and the exact code; that saves diagnostic time and money.

Frequently asked

Can I reset Aventon error 04?

Power cycle with the throttle at rest.

Can I keep riding?

Yes as a regular bike; unplugging the throttle usually restores pedal assist.

Warranty?

Yes within the 2-year electronics warranty unless water damage.

Related Aventon codes

21 · Speed sensor error30 · Communication error

Manuals and video

Not an official Aventon document. Compiled from workshop experience and public service information; details can differ per system version and bike brand.